{"title":"A1 Acrylic Composite","description":"\u003cp\u003e\u003cspan lang=\"EN-GB\" data-mce-fragment=\"1\"\u003eA1, the abbreviation for Acrylic One\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e, is a two-component material consisting of a mineral powder and a water-based acrylic resin. These bind in such a way that a very strong material is created. A1 is environmentally friendly, non-toxic, fire-resistant and is easy to use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFor a full explanation of the product the manual can be downloaded \u003ca href=\"https:\/\/www.activecomposite.com\/wp-content\/uploads\/2022\/10\/A1-Manual_EN_72p.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"a1-sealer-plus-matt","title":"A1 Sealer Plus Matt","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA1 Sealer PLUS is a water-borne coating system to protect the A1 object from weather influences such as moisture and UV radiation\u003cbr\u003e\u003cbr\u003eA1 Sealer PLUS A1 Sealer PLUS is the most common one-component sealer to protect A1 products for outside use. It is easy to apply in one or more layers. The more A1 Sealer PLUS you apply the more gloss will appear (with a max. of 3 layers). It also can be used as a base resin to decorate and give products a natural look. Advantages of the sealer: one component, solvent free, easy to apply, good UV resistant, protection against dirt pick up, quick drying, excellent adhesion and good humidity protection.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll objects in an outdoor environment are subjected to weather influences that have an erosive effect on the A1 object.\u003c\/p\u003e\n\u003cp\u003eOur A1 Sealer PLUS has a protective effect against these influences.\u003cbr\u003e\u003cbr\u003eThere is a choice of A1 Sealer PLUS Matt, Satin and Gloss.\u003cbr\u003e\u003cbr\u003e For the most matte result we recommend first applying a layer with the A1 Sealer PLUS Satin and then a layer with A1 Sealer PLUS Matt. \u003cbr\u003e\u003cbr\u003eThe advantages are: 1 component, solvent-free, water-based, quick-drying, easy to apply, good UV resistance, excellent adhesion, protection against dirt absorption and good protection against moisture.\u003cbr\u003e\u003cbr\u003eThe A1 Sealer PLUS is a so-called breathable coating. \u003cbr\u003eIn addition to any residual moisture after production, A1 absorbs water to a limited extent if placed in a highly humid environment and this water is also (many times faster) released again in a dry environment. With the help of this breathable (vapour open) A1 Sealer PLUS any remaining and\/or absorbed moisture can easily leave the A1 object. Therefore, avoid applying too thick a layer of A1 Sealer PLUS as this may close the A1 object.\u003cbr\u003e\u003c\/p\u003e","brand":"MrResin","offers":[{"title":"250g","offer_id":40809338896560,"sku":"","price":6.5,"currency_code":"GBP","in_stock":true},{"title":"500g","offer_id":40809338929328,"sku":"","price":9.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/244967794_583177379695291_1881515575659484894_n.jpg?v=1633966236"},{"product_id":"copy-of-a1-sealer-plus-satin","title":"A1 Sealer Plus Satin","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA1 Sealer PLUS is a water-borne coating system to protect the A1 object from weather influences such as moisture and UV radiation\u003cbr\u003e\u003cbr\u003eA1 Sealer PLUS A1 Sealer PLUS is the most common one-component sealer to protect A1 products for outside use. It is easy to apply in one or more layers. The more A1 Sealer PLUS you apply the more gloss will appear (with a max. of 3 layers). It also can be used as a base resin to decorate and give products a natural look. Advantages of the sealer: one component, solvent free, easy to apply, good UV resistant, protection against dirt pick up, quick drying, excellent adhesion and good humidity protection.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll objects in an outdoor environment are subjected to weather influences that have an erosive effect on the A1 object.\u003c\/p\u003e\n\u003cp\u003eOur A1 Sealer PLUS has a protective effect against these influences.\u003cbr\u003e\u003cbr\u003eThere is a choice of A1 Sealer PLUS Matt, Satin and Gloss.\u003cbr\u003e\u003cbr\u003e For the most matte result we recommend first applying a layer with the A1 Sealer PLUS Satin and then a layer with A1 Sealer PLUS Matt. \u003cbr\u003e\u003cbr\u003eThe advantages are: 1 component, solvent-free, water-based, quick-drying, easy to apply, good UV resistance, excellent adhesion, protection against dirt absorption and good protection against moisture.\u003cbr\u003e\u003cbr\u003eThe A1 Sealer PLUS is a so-called breathable coating. \u003cbr\u003eIn addition to any residual moisture after production, A1 absorbs water to a limited extent if placed in a highly humid environment and this water is also (many times faster) released again in a dry environment. With the help of this breathable (vapour open) A1 Sealer PLUS any remaining and\/or absorbed moisture can easily leave the A1 object. Therefore, avoid applying too thick a layer of A1 Sealer PLUS as this may close the A1 object.\u003cbr\u003e\u003c\/p\u003e","brand":"MrResin","offers":[{"title":"250g","offer_id":40809339879600,"sku":null,"price":6.5,"currency_code":"GBP","in_stock":true},{"title":"500g","offer_id":40809339912368,"sku":null,"price":9.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/245003763_390486809230408_2569226265049395602_n.jpg?v=1633966278"},{"product_id":"a1-sealer-plus-gloss","title":"A1 Sealer Plus Gloss","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA1 Sealer PLUS is a water-borne coating system to protect the A1 object from weather influences such as moisture and UV radiation\u003cbr\u003e\u003cbr\u003eA1 Sealer PLUS A1 Sealer PLUS is the most common one-component sealer to protect A1 products for outside use. It is easy to apply in one or more layers. The more A1 Sealer PLUS you apply the more gloss will appear (with a max. of 3 layers). It also can be used as a base resin to decorate and give products a natural look. Advantages of the sealer: one component, solvent free, easy to apply, good UV resistant, protection against dirt pick up, quick drying, excellent adhesion and good humidity protection.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll objects in an outdoor environment are subjected to weather influences that have an erosive effect on the A1 object.\u003c\/p\u003e\n\u003cp\u003eOur A1 Sealer PLUS has a protective effect against these influences.\u003cbr\u003e\u003cbr\u003eThere is a choice of A1 Sealer PLUS Matt, Satin and Gloss\u003cbr\u003e\u003cbr\u003e For the most matte result we recommend first applying a layer with the A1 Sealer PLUS Satin and then a layer with A1 Sealer PLUS Matt. \u003cbr\u003e\u003cbr\u003eThe advantages are: 1 component, solvent-free, water-based, quick-drying, easy to apply, good UV resistance, excellent adhesion, protection against dirt absorption and good protection against moisture.\u003cbr\u003e\u003cbr\u003eThe A1 Sealer PLUS is a so-called breathable coating. \u003cbr\u003eIn addition to any residual moisture after production, A1 absorbs water to a limited extent if placed in a highly humid environment and this water is also (many times faster) released again in a dry environment. With the help of this breathable (vapour open) A1 Sealer PLUS any remaining and\/or absorbed moisture can easily leave the A1 object. Therefore, avoid applying too thick a layer of A1 Sealer PLUS as this may close the A1 object.\u003cbr\u003e\u003c\/p\u003e","brand":"MrResin","offers":[{"title":"250g","offer_id":40809348104368,"sku":"","price":6.5,"currency_code":"GBP","in_stock":true},{"title":"500g","offer_id":40809348137136,"sku":"","price":9.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/245295591_355747709575029_7375991171073254868_n.jpg?v=1633966358"},{"product_id":"a1-creatives-iron","title":"A1 Creatives Iron","description":"\u003cp\u003e\u003cstrong\u003eA1Creatives Iron consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100 gram A1Creatives Iron Liquid\u003c\/li\u003e\n\u003cli\u003e250 gram A1Creatives Iron Powder\u003c\/li\u003e\n\u003cli\u003eIron powder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA video on this product can be found here  \u003ca href=\"https:\/\/youtu.be\/v_8t1D_NlDE\"\u003eA1 Iron\u003c\/a\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" id=\"tw-target-text\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan lang=\"en\" class=\"Y2IQFc\"\u003eThe mixing ratio of A1Creatives Iron is 1 part Liquid and 2.5 parts Powder by weight.\u003cbr\u003e\u003cbr\u003e The Iron Powder is used to first apply a thin layer in the mould before casting. \u003cbr\u003eMake sure all parts are ready before mixing the Liquid and Powder. If necessary, use a scale. \u003cbr\u003e\u003cbr\u003e After treatment: Place the object in a humid environment to achieve a rust effect.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan lang=\"en\" class=\"Y2IQFc\"\u003eThis can take up to a few days. Remove the object from this humid environment when the object is rusty enough. It is also possible to use chemicals to achieve a rust effect. Carefully read the instructions of these chemicals beforehand.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ehttps:\/\/a1creatives.fun\/\u003cbr\u003e\u003cbr\u003eA1Creatives is a ready to use 2- or 3-component system consisting of a mineral powder, a water-based resin and for some versions a dust colour. These bind in such a way that a very strong object is created with a different appearances.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA1Creatives is water-based, easy to use and does not contain solvents. A1Creatives is developed to be casted into a (silicone) mould as it will create a copy of the mould with all fine details.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA1Creatives Gold consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e100 gram A1Creatives Liquid\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e200 – 350 gram A1Creatives Powder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe mixing ratio of A1Creatives varies per A1Creatives version and is indicated on the jar. \u003c\/span\u003e Make sure all components are present before starting to mix. Use a scale if needed.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions for mixing A1Creatives\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetermine the amount of A1Creatives needed. If needed you can combine several sets of A1Creatives together.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShake the liquid well and pour 1 part liquid (on weight) into a cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePut 2 to 3.5 parts of Powder (on weight) into the same cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix the Liquid and the Powder until all lumps have disappeared. Normally this will take between 30 and 60 seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInstructions for casting A1Creatives into a mould:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter mixing A1Creatives, pour about half of the mixture into the mould and shake or tap the sides of the mould to remove any trapped air. For complex moulds, we recommend rotating the mould with the mixture a few times, in order to get a thin layer of the mixture throughout the mould and to prevent air entrapment. An alternative is to apply a first layer of the mixture in the mould with a brush.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFill the mould with the rest of the mixture.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWait between 20 and 60 minutes to let the A1Creatives to cure. Use the leftover in the mixing cup to verify if the A1Creatives has cured. Extend the waiting time (for fragile objects with several hours) if needed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRelease the A1Creatives object from the mould.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter placing the object onto a surface expect some moist to be released on the surface as the curing will continue for the next few hours.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MrResin","offers":[{"title":"Default Title","offer_id":40908642255024,"sku":"","price":7.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/Owl_IRON-2-e1611512462120.jpg?v=1635858130"},{"product_id":"a1-creatives-aluminium","title":"A1 Creatives Aluminium","description":"\u003cp\u003e\u003cstrong\u003eA1Creatives Aluminium consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100 gram A1Creatives \u003cspan data-mce-fragment=\"1\"\u003eAluminium\u003c\/span\u003e Liquid\u003c\/li\u003e\n\u003cli\u003e250 gram A1Creatives \u003cspan data-mce-fragment=\"1\"\u003eAluminium\u003c\/span\u003e Powder\u003c\/li\u003e\n\u003cli\u003eAluminium powder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA video on this product can be found here \u003ca href=\"https:\/\/youtu.be\/KvjZjbpNbB4\"\u003eA1 Aluminium\u003c\/a\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" id=\"tw-target-text\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan lang=\"en\" class=\"Y2IQFc\"\u003eThe mixing ratio of A1Creatives \u003cspan data-mce-fragment=\"1\"\u003eAluminium\u003c\/span\u003e is 1 part Liquid and 2.5 parts Powder by weight.\u003cbr\u003e\u003cbr\u003e The \u003cspan data-mce-fragment=\"1\"\u003eAluminium\u003c\/span\u003e Powder is used to first apply a thin layer in the mould before casting. \u003cbr\u003eMake sure all parts are ready before mixing the Liquid and Powder. If necessary, use a scale. \u003cbr\u003e\u003cbr\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ehttps:\/\/a1creatives.fun\/\u003cbr\u003e\u003cbr\u003eA1Creatives is a ready to use 2- or 3-component system consisting of a mineral powder, a water-based resin and for some versions a dust colour. These bind in such a way that a very strong object is created with a different appearances.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA1Creatives is water-based, easy to use and does not contain solvents. A1Creatives is developed to be casted into a (silicone) mould as it will create a copy of the mould with all fine details.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe mixing ratio of A1Creatives varies per A1Creatives version and is indicated on the jar. \u003c\/span\u003e Make sure all components are present before starting to mix. Use a scale if needed.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions for mixing A1Creatives\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetermine the amount of A1Creatives needed. If needed you can combine several sets of A1Creatives together.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShake the liquid well and pour 1 part liquid (on weight) into a cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePut 2 to 3.5 parts of Powder (on weight) into the same cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix the Liquid and the Powder until all lumps have disappeared. Normally this will take between 30 and 60 seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInstructions for casting A1Creatives into a mould:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter mixing A1Creatives, pour about half of the mixture into the mould and shake or tap the sides of the mould to remove any trapped air. For complex moulds, we recommend rotating the mould with the mixture a few times, in order to get a thin layer of the mixture throughout the mould and to prevent air entrapment. An alternative is to apply a first layer of the mixture in the mould with a brush.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFill the mould with the rest of the mixture.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWait between 20 and 60 minutes to let the A1Creatives to cure. Use the leftover in the mixing cup to verify if the A1Creatives has cured. Extend the waiting time (for fragile objects with several hours) if needed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRelease the A1Creatives object from the mould.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter placing the object onto a surface expect some moist to be released on the surface as the curing will continue for the next few hours.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MrResin","offers":[{"title":"Default Title","offer_id":40912582181040,"sku":"","price":7.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/Owl_Alu.jpg?v=1635949874"},{"product_id":"a1-creatives-concrete","title":"A1 Creatives Concrete","description":"\u003cp\u003e\u003cstrong\u003eA1Creatives Concrete consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100 grams of A1Creatives Concrete Liquid\u003c\/li\u003e\n\u003cli\u003e300 grams of A1Creatives Concrete Powder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe mixing ratio to create a mixture is 1 part Liquid and 3 parts Powder on weight. Make sure all components are present before starting to mix. Use a scale if needed.\u003c\/p\u003e\n\u003cp dir=\"ltr\" id=\"tw-target-text\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan lang=\"en\" class=\"Y2IQFc\"\u003eFor a video of this product click here \u003ca href=\"https:\/\/youtu.be\/qLKJoMyVfic\"\u003eA1 Concrete\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ehttps:\/\/a1creatives.fun\/\u003cbr\u003e\u003cbr\u003eA1Creatives is a ready to use 2- or 3-component system consisting of a mineral powder, a water-based resin and for some versions a dust colour. These bind in such a way that a very strong object is created with a different appearances.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA1Creatives is water-based, easy to use and does not contain solvents. A1Creatives is developed to be casted into a (silicone) mould as it will create a copy of the mould with all fine details.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe mixing ratio of A1Creatives varies per A1Creatives version and is indicated on the jar. \u003c\/span\u003e Make sure all components are present before starting to mix. Use a scale if needed.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions for mixing A1Creatives\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetermine the amount of A1Creatives needed. If needed you can combine several sets of A1Creatives together.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShake the liquid well and pour 1 part liquid (on weight) into a cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePut 2 to 3.5 parts of Powder (on weight) into the same cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix the Liquid and the Powder until all lumps have disappeared. Normally this will take between 30 and 60 seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInstructions for casting A1Creatives into a mould:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter mixing A1Creatives, pour about half of the mixture into the mould and shake or tap the sides of the mould to remove any trapped air. For complex moulds, we recommend rotating the mould with the mixture a few times, in order to get a thin layer of the mixture throughout the mould and to prevent air entrapment. An alternative is to apply a first layer of the mixture in the mould with a brush.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFill the mould with the rest of the mixture.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWait between 20 and 60 minutes to let the A1Creatives to cure. Use the leftover in the mixing cup to verify if the A1Creatives has cured. Extend the waiting time (for fragile objects with several hours) if needed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRelease the A1Creatives object from the mould.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter placing the object onto a surface expect some moist to be released on the surface as the curing will continue for the next few hours.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MrResin","offers":[{"title":"9018","offer_id":40912601350320,"sku":"","price":6.0,"currency_code":"GBP","in_stock":true},{"title":"7005","offer_id":40912601383088,"sku":"","price":6.0,"currency_code":"GBP","in_stock":true},{"title":"7039","offer_id":40912601415856,"sku":"","price":6.0,"currency_code":"GBP","in_stock":true},{"title":"7043","offer_id":40912601448624,"sku":"","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/Verpakking_Concrete1.jpg?v=1635950074"},{"product_id":"copy-of-a1-creatives-aluminium","title":"A1 Creatives Gold","description":"\u003cp\u003e\u003cstrong\u003eA1Creatives Gold consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100 grams A1Creatives Gold Liquid\u003c\/li\u003e\n\u003cli\u003e200 grams A1Creatives Gold powder\u003c\/li\u003e\n\u003cli\u003eGold powder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe mixing ration of A1Creatives is 1 part Liquid and 2 part powder on weight. The Gold powder is used to apply a thin layer into the mould before casting. Make sure all materials are ready to use before you mix the Liquid and the Powder. If needed use scales.\u003c\/p\u003e\n\u003cp dir=\"ltr\" id=\"tw-target-text\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan lang=\"en\" class=\"Y2IQFc\"\u003eA video of this product can be found here \u003ca href=\"https:\/\/youtu.be\/9EWpYW1oK5w\"\u003eA1 Gold\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ehttps:\/\/a1creatives.fun\/\u003cbr\u003e\u003cbr\u003eA1Creatives is a ready to use 2- or 3-component system consisting of a mineral powder, a water-based resin and for some versions a dust colour. These bind in such a way that a very strong object is created with a different appearances.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA1Creatives is water-based, easy to use and does not contain solvents. A1Creatives is developed to be casted into a (silicone) mould as it will create a copy of the mould with all fine details.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe mixing ratio of A1Creatives varies per A1Creatives version and is indicated on the jar. \u003c\/span\u003e Make sure all components are present before starting to mix. Use a scale if needed.\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions for mixing A1Creatives\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetermine the amount of A1Creatives needed. If needed you can combine several sets of A1Creatives together.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShake the liquid well and pour 1 part liquid (on weight) into a cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePut 2 to 3.5 parts of Powder (on weight) into the same cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix the Liquid and the Powder until all lumps have disappeared. Normally this will take between 30 and 60 seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInstructions for casting A1Creatives into a mould:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter mixing A1Creatives, pour about half of the mixture into the mould and shake or tap the sides of the mould to remove any trapped air. For complex moulds, we recommend rotating the mould with the mixture a few times, in order to get a thin layer of the mixture throughout the mould and to prevent air entrapment. An alternative is to apply a first layer of the mixture in the mould with a brush.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFill the mould with the rest of the mixture.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWait between 20 and 60 minutes to let the A1Creatives to cure. Use the leftover in the mixing cup to verify if the A1Creatives has cured. Extend the waiting time (for fragile objects with several hours) if needed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRelease the A1Creatives object from the mould.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter placing the object onto a surface expect some moist to be released on the surface as the curing will continue for the next few hours.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MrResin","offers":[{"title":"Default Title","offer_id":40912606199984,"sku":"","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/Owl_Gold.jpg?v=1635950432"},{"product_id":"a1-creatives-silver","title":"A1 Creatives Silver","description":"\u003cp\u003e\u003cstrong\u003eA1Creatives Silver consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100 grams A1Creatives Silver Liquid\u003c\/li\u003e\n\u003cli\u003e200 grams A1Creatives Silver powder\u003c\/li\u003e\n\u003cli\u003eSilver powder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe mixing ration of A1Creatives is 1 part Liquid and 2 part powder on weight. The Silver powder is used to apply a thin layer into the mould before casting. Make sure all materials are ready to use before you mix the Liquid and the Powder. If needed use scales.\u003c\/p\u003e\n\u003cp dir=\"ltr\" id=\"tw-target-text\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan lang=\"en\" class=\"Y2IQFc\"\u003eA video of this product can be found here \u003ca href=\"https:\/\/youtu.be\/mLPFSCVO1tA\"\u003eA1 Silver\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ehttps:\/\/a1creatives.fun\/\u003cbr\u003e\u003cbr\u003eA1Creatives is a ready to use 2- or 3-component system consisting of a mineral powder, a water-based resin and for some versions a dust colour. These bind in such a way that a very strong object is created with a different appearances.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA1Creatives is water-based, easy to use and does not contain solvents. A1Creatives is developed to be casted into a (silicone) mould as it will create a copy of the mould with all fine details.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe mixing ratio of A1Creatives varies per A1Creatives version and is indicated on the jar. \u003c\/span\u003e Make sure all components are present before starting to mix. Use a scale if needed.\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions for mixing A1Creatives\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetermine the amount of A1Creatives needed. If needed you can combine several sets of A1Creatives together.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShake the liquid well and pour 1 part liquid (on weight) into a cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePut 2 to 3.5 parts of Powder (on weight) into the same cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix the Liquid and the Powder until all lumps have disappeared. Normally this will take between 30 and 60 seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInstructions for casting A1Creatives into a mould:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter mixing A1Creatives, pour about half of the mixture into the mould and shake or tap the sides of the mould to remove any trapped air. For complex moulds, we recommend rotating the mould with the mixture a few times, in order to get a thin layer of the mixture throughout the mould and to prevent air entrapment. An alternative is to apply a first layer of the mixture in the mould with a brush.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFill the mould with the rest of the mixture.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWait between 20 and 60 minutes to let the A1Creatives to cure. Use the leftover in the mixing cup to verify if the A1Creatives has cured. Extend the waiting time (for fragile objects with several hours) if needed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRelease the A1Creatives object from the mould.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter placing the object onto a surface expect some moist to be released on the surface as the curing will continue for the next few hours.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MrResin","offers":[{"title":"Default Title","offer_id":40912610394288,"sku":"","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/Silver-Owl-A1Creatives.jpg?v=1635950524"},{"product_id":"a1-creatives-bronze","title":"A1 Creatives Bronze","description":"\u003cp\u003e\u003cstrong\u003eA1Creatives Bronze consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100 grams A1Creatives Bronze Liquid\u003c\/li\u003e\n\u003cli\u003e200 grams A1Creatives Bronze powder\u003c\/li\u003e\n\u003cli\u003eBronze powder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe mixing ration of A1Creatives is 1 part Liquid and 2 part powder on weight. The Bronze powder is used to apply a thin layer into the mould before casting. Make sure all materials are ready to use before you mix the Liquid and the Powder. If needed use scales\u003c\/p\u003e\n\u003cp dir=\"ltr\" id=\"tw-target-text\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan lang=\"en\" class=\"Y2IQFc\"\u003eA video of this product can be found here\u003ca href=\"https:\/\/youtu.be\/_gvnOWaEtWo\"\u003e A1 Bronze\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ehttps:\/\/a1creatives.fun\/\u003cbr\u003e\u003cbr\u003eA1Creatives is a ready to use 2- or 3-component system consisting of a mineral powder, a water-based resin and for some versions a dust colour. These bind in such a way that a very strong object is created with a different appearances.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA1Creatives is water-based, easy to use and does not contain solvents. A1Creatives is developed to be casted into a (silicone) mould as it will create a copy of the mould with all fine details.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe mixing ratio of A1Creatives varies per A1Creatives version and is indicated on the jar. \u003c\/span\u003e Make sure all components are present before starting to mix. Use a scale if needed.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions for mixing A1Creatives\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetermine the amount of A1Creatives needed. If needed you can combine several sets of A1Creatives together.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShake the liquid well and pour 1 part liquid (on weight) into a cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePut 2 to 3.5 parts of Powder (on weight) into the same cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix the Liquid and the Powder until all lumps have disappeared. Normally this will take between 30 and 60 seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInstructions for casting A1Creatives into a mould:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter mixing A1Creatives, pour about half of the mixture into the mould and shake or tap the sides of the mould to remove any trapped air. For complex moulds, we recommend rotating the mould with the mixture a few times, in order to get a thin layer of the mixture throughout the mould and to prevent air entrapment. An alternative is to apply a first layer of the mixture in the mould with a brush.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFill the mould with the rest of the mixture.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWait between 20 and 60 minutes to let the A1Creatives to cure. Use the leftover in the mixing cup to verify if the A1Creatives has cured. Extend the waiting time (for fragile objects with several hours) if needed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRelease the A1Creatives object from the mould.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter placing the object onto a surface expect some moist to be released on the surface as the curing will continue for the next few hours.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MrResin","offers":[{"title":"Default Title","offer_id":40912614719664,"sku":"","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/Owl_Bronze.jpg?v=1635950635"},{"product_id":"a1-creatives-terracotta","title":"A1 Creatives Terracotta","description":"\u003cp\u003e\u003cstrong\u003eA1Creatives Terracotta consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100 grams of A1Creatives Terracotta Liquid\u003c\/li\u003e\n\u003cli\u003e200 grams of A1Creatives Terracotta Powder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe mixing ratio to create a mixture is 1 part Liquid and 2 parts Powder on weight. Make sure all components are present before starting to mix. Use a scale if needed.\u003c\/p\u003e\n\u003cp dir=\"ltr\" id=\"tw-target-text\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan lang=\"en\" class=\"Y2IQFc\"\u003eA video of this product can be found here \u003ca href=\"https:\/\/youtu.be\/ACxo24NTbTM\"\u003eA1 Colours\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ehttps:\/\/a1creatives.fun\/\u003cbr\u003e\u003cbr\u003eA1Creatives is a ready to use 2- or 3-component system consisting of a mineral powder, a water-based resin and for some versions a dust colour. These bind in such a way that a very strong object is created with a different appearances.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA1Creatives is water-based, easy to use and does not contain solvents. A1Creatives is developed to be casted into a (silicone) mould as it will create a copy of the mould with all fine details.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe mixing ratio of A1Creatives varies per A1Creatives version and is indicated on the jar. \u003c\/span\u003e Make sure all components are present before starting to mix. Use a scale if needed.\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions for mixing A1Creatives\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetermine the amount of A1Creatives needed. If needed you can combine several sets of A1Creatives together.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShake the liquid well and pour 1 part liquid (on weight) into a cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePut 2 to 3.5 parts of Powder (on weight) into the same cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix the Liquid and the Powder until all lumps have disappeared. Normally this will take between 30 and 60 seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInstructions for casting A1Creatives into a mould:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter mixing A1Creatives, pour about half of the mixture into the mould and shake or tap the sides of the mould to remove any trapped air. For complex moulds, we recommend rotating the mould with the mixture a few times, in order to get a thin layer of the mixture throughout the mould and to prevent air entrapment. An alternative is to apply a first layer of the mixture in the mould with a brush.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFill the mould with the rest of the mixture.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWait between 20 and 60 minutes to let the A1Creatives to cure. Use the leftover in the mixing cup to verify if the A1Creatives has cured. Extend the waiting time (for fragile objects with several hours) if needed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRelease the A1Creatives object from the mould.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter placing the object onto a surface expect some moist to be released on the surface as the curing will continue for the next few hours.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MrResin","offers":[{"title":"Default Title","offer_id":40912619962544,"sku":"","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/Terracotta_Owl1.jpg?v=1635950779"},{"product_id":"a1-creatives-black","title":"A1 Creatives Black","description":"\u003cp\u003e\u003cstrong\u003eA1Creatives Black consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100 grams of A1Creatives Black Liquid\u003c\/li\u003e\n\u003cli\u003e200 grams of A1Creatives Black Powder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe mixing ratio to create a mixture is 1 part Liquid and 2 parts Powder on weight. Make sure all components are present before starting to mix. Use a scale if needed.\u003c\/p\u003e\n\u003cp dir=\"ltr\" id=\"tw-target-text\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan lang=\"en\" class=\"Y2IQFc\"\u003eA video of this product can be found here \u003ca href=\"https:\/\/youtu.be\/ACxo24NTbTM\"\u003eA1 Colours\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ehttps:\/\/a1creatives.fun\/\u003cbr\u003e\u003cbr\u003eA1Creatives is a ready to use 2- or 3-component system consisting of a mineral powder, a water-based resin and for some versions a dust colour. These bind in such a way that a very strong object is created with a different appearances.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA1Creatives is water-based, easy to use and does not contain solvents. A1Creatives is developed to be casted into a (silicone) mould as it will create a copy of the mould with all fine details.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe mixing ratio of A1Creatives varies per A1Creatives version and is indicated on the jar. \u003c\/span\u003e Make sure all components are present before starting to mix. Use a scale if needed.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions for mixing A1Creatives\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetermine the amount of A1Creatives needed. If needed you can combine several sets of A1Creatives together.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShake the liquid well and pour 1 part liquid (on weight) into a cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePut 2 to 3.5 parts of Powder (on weight) into the same cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix the Liquid and the Powder until all lumps have disappeared. Normally this will take between 30 and 60 seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInstructions for casting A1Creatives into a mould:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter mixing A1Creatives, pour about half of the mixture into the mould and shake or tap the sides of the mould to remove any trapped air. For complex moulds, we recommend rotating the mould with the mixture a few times, in order to get a thin layer of the mixture throughout the mould and to prevent air entrapment. An alternative is to apply a first layer of the mixture in the mould with a brush.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFill the mould with the rest of the mixture.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWait between 20 and 60 minutes to let the A1Creatives to cure. Use the leftover in the mixing cup to verify if the A1Creatives has cured. Extend the waiting time (for fragile objects with several hours) if needed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRelease the A1Creatives object from the mould.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter placing the object onto a surface expect some moist to be released on the surface as the curing will continue for the next few hours.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MrResin","offers":[{"title":"Default Title","offer_id":40912627007664,"sku":"","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/Owl_Black1.jpg?v=1635950894"},{"product_id":"a1-creatives-sand-stone","title":"A1 Creatives Sand Stone","description":"\u003cp\u003e\u003cstrong\u003eA1Creatives White Stone consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100 grams A1Creatives Sand Stone Liquid\u003c\/li\u003e\n\u003cli\u003e350 grams A1Creatives Sand Stone Powder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe mixing ration of A1Creatives Sand Stone is 1 part Liquid and 3.5 part powder on weight. Make sure all materials are ready to use before you mix the Liquid and the Powder. If needed use scales.\u003c\/p\u003e\n\u003cp dir=\"ltr\" id=\"tw-target-text\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan lang=\"en\" class=\"Y2IQFc\"\u003eA video of this product can be found here   \u003ca href=\"https:\/\/youtu.be\/js_55AJbVCU\"\u003eA1 Sand Stone\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ehttps:\/\/a1creatives.fun\/\u003cbr\u003e\u003cbr\u003eA1Creatives is a ready to use 2- or 3-component system consisting of a mineral powder, a water-based resin and for some versions a dust colour. These bind in such a way that a very strong object is created with a different appearances.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA1Creatives is water-based, easy to use and does not contain solvents. A1Creatives is developed to be casted into a (silicone) mould as it will create a copy of the mould with all fine details.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe mixing ratio of A1Creatives varies per A1Creatives version and is indicated on the jar. \u003c\/span\u003e Make sure all components are present before starting to mix. Use a scale if needed.\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions for mixing A1Creatives\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetermine the amount of A1Creatives needed. If needed you can combine several sets of A1Creatives together.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShake the liquid well and pour 1 part liquid (on weight) into a cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePut 2 to 3.5 parts of Powder (on weight) into the same cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix the Liquid and the Powder until all lumps have disappeared. Normally this will take between 30 and 60 seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInstructions for casting A1Creatives into a mould:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter mixing A1Creatives, pour about half of the mixture into the mould and shake or tap the sides of the mould to remove any trapped air. For complex moulds, we recommend rotating the mould with the mixture a few times, in order to get a thin layer of the mixture throughout the mould and to prevent air entrapment. An alternative is to apply a first layer of the mixture in the mould with a brush.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFill the mould with the rest of the mixture.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWait between 20 and 60 minutes to let the A1Creatives to cure. Use the leftover in the mixing cup to verify if the A1Creatives has cured. Extend the waiting time (for fragile objects with several hours) if needed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRelease the A1Creatives object from the mould.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter placing the object onto a surface expect some moist to be released on the surface as the curing will continue for the next few hours.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MrResin","offers":[{"title":"Default Title","offer_id":40912634675376,"sku":"","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/Owl_Sand-stone-1-e1611512449331.jpg?v=1635951181"},{"product_id":"a1-creatives-ivory-stone","title":"A1 Creatives Ivory Stone","description":"\u003cp\u003e\u003cstrong\u003eA1Creatives Ivory Stone consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100 grams A1Creatives Ivory Stone Liquid\u003c\/li\u003e\n\u003cli\u003e200 grams A1Creatives Ivory Stone Powder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe mixing ration of A1Creatives is 1 part Liquid and 2 part powder on weight. Make sure all materials are ready to use before you mix the Liquid and the Powder. If needed use scales.\u003c\/p\u003e\n\u003cp class=\"tw-data-text tw-text-large XcVN5d tw-ta\" data-placeholder=\"Translation\" id=\"tw-target-text\" dir=\"ltr\"\u003e\u003cspan class=\"Y2IQFc\" lang=\"en\"\u003eA video of this product can be found here   \u003ca href=\"https:\/\/youtu.be\/y4VAoZcnS0E\"\u003eA1 Ivory Stone\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"tw-data-text tw-text-large XcVN5d tw-ta\" data-placeholder=\"Translation\" dir=\"ltr\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ehttps:\/\/a1creatives.fun\/\u003cbr\u003e\u003cbr\u003eA1Creatives is a ready to use 2- or 3-component system consisting of a mineral powder, a water-based resin and for some versions a dust colour. These bind in such a way that a very strong object is created with a different appearances.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA1Creatives is water-based, easy to use and does not contain solvents. A1Creatives is developed to be casted into a (silicone) mould as it will create a copy of the mould with all fine details.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe mixing ratio of A1Creatives varies per A1Creatives version and is indicated on the jar. \u003c\/span\u003e Make sure all components are present before starting to mix. Use a scale if needed.\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions for mixing A1Creatives\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetermine the amount of A1Creatives needed. If needed you can combine several sets of A1Creatives together.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShake the liquid well and pour 1 part liquid (on weight) into a cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePut 2 to 3.5 parts of Powder (on weight) into the same cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix the Liquid and the Powder until all lumps have disappeared. Normally this will take between 30 and 60 seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInstructions for casting A1Creatives into a mould:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter mixing A1Creatives, pour about half of the mixture into the mould and shake or tap the sides of the mould to remove any trapped air. For complex moulds, we recommend rotating the mould with the mixture a few times, in order to get a thin layer of the mixture throughout the mould and to prevent air entrapment. An alternative is to apply a first layer of the mixture in the mould with a brush.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFill the mould with the rest of the mixture.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWait between 20 and 60 minutes to let the A1Creatives to cure. Use the leftover in the mixing cup to verify if the A1Creatives has cured. Extend the waiting time (for fragile objects with several hours) if needed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRelease the A1Creatives object from the mould.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter placing the object onto a surface expect some moist to be released on the surface as the curing will continue for the next few hours.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MrResin","offers":[{"title":"Default Title","offer_id":40912638902448,"sku":"","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/Ivory_Owl1.jpg?v=1635951366"},{"product_id":"a1-creatives-glow","title":"A1 Creatives Glow","description":"\u003cp\u003e\u003cstrong\u003eA1Creatives Glow consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100 grams of A1Creatives Glow Liquid\u003c\/li\u003e\n\u003cli\u003e200 grams of A1Creatives Glow Powder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe mixing ratio to create a mixture is 1 part Liquid and 2 parts Powder on weight. Make sure all components are present before starting to mix. Use a scale if needed.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA video on this product can be found here \u003ca href=\"https:\/\/www.youtube.com\/watch?v=4971S7OQVv4\"\u003eA1 Glow\u003c\/a\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ehttps:\/\/a1creatives.fun\/\u003cbr\u003e\u003cbr\u003eA1Creatives is a ready to use 2- or 3-component system consisting of a mineral powder, a water-based resin and for some versions a dust colour. These bind in such a way that a very strong object is created with a different appearances.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA1Creatives is water-based, easy to use and does not contain solvents. A1Creatives is developed to be casted into a (silicone) mould as it will create a copy of the mould with all fine details.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe mixing ratio of A1Creatives varies per A1Creatives version and is indicated on the jar. \u003c\/span\u003e Make sure all components are present before starting to mix. Use a scale if needed.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions for mixing A1Creatives\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetermine the amount of A1Creatives needed. If needed you can combine several sets of A1Creatives together.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShake the liquid well and pour 1 part liquid (on weight) into a cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePut 2 to 3.5 parts of Powder (on weight) into the same cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix the Liquid and the Powder until all lumps have disappeared. Normally this will take between 30 and 60 seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInstructions for casting A1Creatives into a mould:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter mixing A1Creatives, pour about half of the mixture into the mould and shake or tap the sides of the mould to remove any trapped air. For complex moulds, we recommend rotating the mould with the mixture a few times, in order to get a thin layer of the mixture throughout the mould and to prevent air entrapment. An alternative is to apply a first layer of the mixture in the mould with a brush.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFill the mould with the rest of the mixture.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWait between 20 and 60 minutes to let the A1Creatives to cure. Use the leftover in the mixing cup to verify if the A1Creatives has cured. Extend the waiting time (for fragile objects with several hours) if needed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRelease the A1Creatives object from the mould.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter placing the object onto a surface expect some moist to be released on the surface as the curing will continue for the next few hours.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MrResin","offers":[{"title":"Default Title","offer_id":40912658137264,"sku":"","price":7.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/Owl_GLOW.jpg?v=1635951681"},{"product_id":"a1-creatives-graphite","title":"A1 Creatives Graphite","description":"\u003cp\u003e\u003cstrong\u003eA1Creatives Gold consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100 grams A1Creatives Graphite Liquid\u003c\/li\u003e\n\u003cli\u003e200 grams A1Creatives \u003cspan data-mce-fragment=\"1\"\u003eGraphite\u003c\/span\u003e powder\u003c\/li\u003e\n\u003cli\u003eGraphite powder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe mixing ration of A1Creatives Graphite is 1 part Liquid and 2 part powder on weight. The \u003cspan data-mce-fragment=\"1\"\u003eGraphite\u003c\/span\u003e powder is used to apply a thin layer into the mould before casting. Make sure all materials are ready to use before you mix the Liquid and the Powder. If needed use scales.\u003c\/p\u003e\n\u003cp dir=\"ltr\" id=\"tw-target-text\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan lang=\"en\" class=\"Y2IQFc\"\u003eA video of this product can be found here \u003ca href=\"https:\/\/www.youtube.com\/watch?v=HNsSsf6FA08\"\u003eA1 Graphite\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" data-placeholder=\"Translation\" class=\"tw-data-text tw-text-large XcVN5d tw-ta\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ehttps:\/\/a1creatives.fun\/\u003cbr\u003e\u003cbr\u003eA1Creatives is a ready to use 2- or 3-component system consisting of a mineral powder, a water-based resin and for some versions a dust colour. These bind in such a way that a very strong object is created with a different appearances.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA1Creatives is water-based, easy to use and does not contain solvents. A1Creatives is developed to be casted into a (silicone) mould as it will create a copy of the mould with all fine details.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe mixing ratio of A1Creatives varies per A1Creatives version and is indicated on the jar. \u003c\/span\u003e Make sure all components are present before starting to mix. Use a scale if needed.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions for mixing A1Creatives\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetermine the amount of A1Creatives needed. If needed you can combine several sets of A1Creatives together.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShake the liquid well and pour 1 part liquid (on weight) into a cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePut 2 to 3.5 parts of Powder (on weight) into the same cup.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix the Liquid and the Powder until all lumps have disappeared. Normally this will take between 30 and 60 seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInstructions for casting A1Creatives into a mould:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter mixing A1Creatives, pour about half of the mixture into the mould and shake or tap the sides of the mould to remove any trapped air. For complex moulds, we recommend rotating the mould with the mixture a few times, in order to get a thin layer of the mixture throughout the mould and to prevent air entrapment. An alternative is to apply a first layer of the mixture in the mould with a brush.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFill the mould with the rest of the mixture.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWait between 20 and 60 minutes to let the A1Creatives to cure. Use the leftover in the mixing cup to verify if the A1Creatives has cured. Extend the waiting time (for fragile objects with several hours) if needed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRelease the A1Creatives object from the mould.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter placing the object onto a surface expect some moist to be released on the surface as the curing will continue for the next few hours.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MrResin","offers":[{"title":"Default Title","offer_id":40912771186864,"sku":"","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/Owl_Graphite-e1611512472764.jpg?v=1635953311"},{"product_id":"a1-mixing-blade","title":"A1 Mixing Blade","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe A1 High Shear Mixing Blade is the ideal tool to use when mixing A1. The mixer is 35mm and can be attached to a drilling machine. The mixer has been developed specifically to ensure that A1 Power and A1 Liquid are mixed together properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAlthough hand mixing is normally enough this tool can help with larger quantity mixing. \u003cbr\u003eClean with water after use.\u003c\/span\u003e\u003c\/p\u003e","brand":"MrResin","offers":[{"title":"Default Title","offer_id":40912846291120,"sku":"","price":14.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/a1-active-composite-high-shear-mixing-blades-35mm.jpg?v=1635954194"},{"product_id":"a1-retarder","title":"A1 Retarder","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eA1 Retarder can be used to extend the processing time of the Base material. Always add A1 Retarder to the A1 Liquid, limiting the amount used to a maximum of 2% of the total weight.\u003c\/span\u003e\u003c\/p\u003e","brand":"MrResin","offers":[{"title":"250g","offer_id":40929945714864,"sku":"","price":4.0,"currency_code":"GBP","in_stock":true},{"title":"500g","offer_id":40929945747632,"sku":"","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/products\/A1Retarder.jpg?v=1645786071"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0037\/7670\/8721\/collections\/Screenshot_1332.jpg?v=1633956186","url":"https:\/\/www.clickcraftcreate.co.uk\/en-us\/collections\/a1-acrylic-composite.oembed?page=2","provider":"MrResin","version":"1.0","type":"link"}